[paulsm]

Thank You, Marco

[paulsm]

I just trid this simple:

digitalWrite(pin1, HIGH);

digitalWrite(pin2, LOW);

UNO does give LOW, but controllino does not, is that a malfunction or that is how it works?

[paulsm]

Hello. I am looking to build a cnc machine. Is a controllino a good choice (for cnc)? I see that outputs can be loaded max 2A and if more outputs used at one time – 0.5A max and relay outputs are not the choice. I see that even small stepper, like nema 17 need 1.7 amps or even 3.5 amps when both coils loaded. Correct me if I am wrong, thank you.