<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
		>

<channel>
	<title>Controllino Forums | Lukas | Activity</title>
	<link>https://community.controllino.com/members/lukas/activity/</link>
	<atom:link href="https://community.controllino.com/members/lukas/activity/feed/" rel="self" type="application/rss+xml" />
	<description>Activity feed for Lukas.</description>
	<lastBuildDate>Mon, 12 Oct 2026 23:36:00 +0000</lastBuildDate>
	<generator>https://buddypress.org/?v=1.6.3</generator>
	<language>en-US</language>
	<ttl>30</ttl>
	<sy:updatePeriod>hourly</sy:updatePeriod>
	<sy:updateFrequency>2</sy:updateFrequency>
		
								<item>
				<guid isPermaLink="false">1dc5330db48569454d167c8be7df8382</guid>
				<title>Lukas replied to the discussion USB Link Controllino make reset when RaspPI3 ShutDown in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/usb-link-controllino-make-reset-when-rasppi3-shutdown/#post-13074</link>
				<pubDate>Wed, 15 Mar 2023 16:28:47 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi Xavier,</p>
<p>yes, this is normal behaviour of the Arduino USB interface. This feature (reset based on DTR) is used during the programming. DTR is toggled by the system when the Virtual USB port is open/closed and it is very hard to avoid that.</p>
<p>But there exists kind of a hack how to prevent this behaviour. Interconnect 5V a and RESET signals at&hellip;</p>
<p><span class="activity-read-more" id="activity-read-more-3522"><a href="https://community.controllino.com/forums/discussion/usb-link-controllino-make-reset-when-rasppi3-shutdown/#post-13074" rel="nofollow"> Read more</a></span></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">0f5dff554329a5eb028fbb1c5f79be73</guid>
				<title>Lukas replied to the discussion Controllino Mega RS485 ModbusRTU with DBLS-01S brushless dc motor driver in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/controllino-mega-rs485-modbusrtu-with-dbls-01s-brushless-dc-motor-driver/#post-13073</link>
				<pubDate>Wed, 15 Mar 2023 16:03:04 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi nbcdntr,</p>
<p>Modbus is tricky. It is hard to let it running when you do not have experience with the master side (CONTROLLINO) and the slave (sensor or motor controller). I always recommend to start with simplier setup &#8211; use PC with USB-RS485 converter and some Modbus Master application and try to control the motor. Then, when you are sure you know&hellip;</p>
<p><span class="activity-read-more" id="activity-read-more-3521"><a href="https://community.controllino.com/forums/discussion/controllino-mega-rs485-modbusrtu-with-dbls-01s-brushless-dc-motor-driver/#post-13073" rel="nofollow"> Read more</a></span></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">6259539ab05890fda35e7bfa835c0be1</guid>
				<title>Lukas replied to the discussion After update to Arduino IDE 2.0.1, uload is no longer possible in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/after-update-to-arduino-ide-2-0-1-uload-is-no-longer-possible/#post-13072</link>
				<pubDate>Wed, 15 Mar 2023 15:46:40 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi all,</p>
<p>we will try to fix this in the new release of the CONTROLLINO Library.</p>
<p>I hope it happens in the next two weeks.</p>
<p>Thanks,</p>
<p>Lukas</p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">7d0e0694c99905e94a77fbbc940b7aea</guid>
				<title>Lukas replied to the discussion Controllino Myplc? in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/controllino-myplc/#post-13070</link>
				<pubDate>Wed, 15 Mar 2023 15:40:14 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi Jelle,</p>
<p>Hi Steve,</p>
<p>as far as I know from the CONTROLLINO management the myPLC serial production was not launched because of the world wide chip shortage. </p>
<p>That is the reason why the NEO is based on the RP2040 MCU which is available in high amounts and with reasonable price.</p>
<p><span>I hope it will be released soon.</span></p>
<p><span>Thanks,</span></p>
<p><span>Lukas</span></p>
<p><span> </span></p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">633b8245b6b546f53a5ac759ec0f133b</guid>
				<title>Lukas replied to the discussion Inline flow sensor not sending data to Controllino Mega in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/inline-flow-sensor-not-sending-data-to-controllino-mega/#post-13069</link>
				<pubDate>Wed, 15 Mar 2023 15:32:43 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi Barrels,</p>
<p>at first to the Modbus. Before you start the integration of the sensor with the CONTROLLINO, please try to control the sensor from a PC with RS485-USB converter and some Modbus RTU Master application. You will easily fine proper registry numbers and meanings etc. </p>
<p></p>
<p>To the analog measurement. You cannot directly connect current loop 4-20&hellip;</p>
<p><span class="activity-read-more" id="activity-read-more-3518"><a href="https://community.controllino.com/forums/discussion/inline-flow-sensor-not-sending-data-to-controllino-mega/#post-13069" rel="nofollow"> Read more</a></span></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">c1683ef842e0964be38540cda8b3ca91</guid>
				<title>Lukas replied to the discussion Feasible or Fool Hardy? in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/feasible-or-fool-hardy/#post-13068</link>
				<pubDate>Wed, 15 Mar 2023 15:02:00 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi Keith,</p>
<p>well &#8230; it sounds like a very ambitious project 🙂</p>
<p>In principle it should be possible with CONTROLLINO. The only limitation may be program flash memory of ATmega2560. All the rest is about your work with wiring and programming.</p>
<p>Good luck!</p>
<p>Lukas</p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">40fcac419fcc01cc1b15a73ca11036a4</guid>
				<title>Lukas replied to the discussion OTA firmware upload in the forum Software &#038; Firmware</title>
				<link>https://community.controllino.com/forums/discussion/ota-firmware-upload/#post-13066</link>
				<pubDate>Fri, 10 Mar 2023 11:15:26 +0000</pubDate>

									<content:encoded><![CDATA[<p>I am sorry, but it should be invented by the Arduino community 🙂</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">a14a5bb0d4ea329b6d6fe4d6c7afeeff</guid>
				<title>Lukas replied to the discussion controllino maxi SPI problem in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/controllino-maxi-spi-problem/#post-12557</link>
				<pubDate>Thu, 05 May 2022 12:50:58 +0000</pubDate>

									<content:encoded><![CDATA[<p>Please see <a target='_blank' href="https://github.com/CONTROLLINO-PLC/CONTROLLINO_Library#faq" rel="nofollow">FAQ#7 </a></p>
<p>You should call Controllino_RTC_init(); before you use SPI for external device.</p>
<p>Lukas</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">59d94bf7b025a5e78f25a5fea7196bcc</guid>
				<title>Lukas replied to the discussion 16 but PWM - timer mapping in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/16-but-pwm-timer-mapping/#post-12556</link>
				<pubDate>Thu, 05 May 2022 12:36:05 +0000</pubDate>

									<content:encoded><![CDATA[<p>Let´s try to check c:Program Files (x86)Arduinohardwarearduinoavrcoresarduinowiring_analog.c</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">2bd38cd8abe2067800bd4c64aa7fd013</guid>
				<title>Lukas replied to the discussion How To Change PWM Frequency Of Controlino Mega in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/how-to-change-pwm-frequency-of-controlino-mega/#post-12555</link>
				<pubDate>Thu, 05 May 2022 12:33:06 +0000</pubDate>

									<content:encoded><![CDATA[<p>Yes, exactly. It is compatible with Arduino Mega.</p>
<p>Lukas</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">ea06844319b0cfd13c879f36635c08a7</guid>
				<title>Lukas replied to the discussion Controllino MAXI, bricked? in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/controllino-maxi-bricked/#post-12081</link>
				<pubDate>Wed, 19 Jan 2022 08:57:24 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi magloman,</p>
<p>this is strange. Is it 100% replicable and always with the same result? (same corrupted address)</p>
<p>Are you sure that it is not cause by the USB cable? Corrupted or too long, or connected via hub?</p>
<p>Thanks,</p>
<p>Lukas </p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">5861853c5f53a9e4d6a035682d5b7a37</guid>
				<title>Lukas replied to the discussion can't login to account, can't recover password @controllino in the forum General Discussion</title>
				<link>https://community.controllino.com/forums/discussion/cant-login-to-account-cant-recover-password-controllino/#post-12080</link>
				<pubDate>Wed, 19 Jan 2022 08:51:51 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hello beetroot,</p>
<p>I will forward your request to responsible person at CONTROLLINO.</p>
<p>Best regards,</p>
<p>Lukas</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">2fc01ff72b4e0ac32ad24a20d269b46c</guid>
				<title>Lukas replied to the discussion OTA firmware upload in the forum Software &#038; Firmware</title>
				<link>https://community.controllino.com/forums/discussion/ota-firmware-upload/#post-12079</link>
				<pubDate>Wed, 19 Jan 2022 08:50:44 +0000</pubDate>

									<content:encoded><![CDATA[<p>Not at our side. </p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">e2c6a042bb13391d8623b0d1be53ed25</guid>
				<title>Lukas replied to the discussion Modbus write single register code. Not working, can someone tell me why ? in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/modbus-write-single-register-code-not-working-can-someone-tell-me-why/#post-12063</link>
				<pubDate>Tue, 04 Jan 2022 16:20:14 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi,</p>
<p>Do you have problem with register read (like in your sketch) or with register write (like in the title of the issue)?</p>
<p>Do you have any progress so far?</p>
<p>Thanks,</p>
<p>Lukas</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">c7bbb3190f1f7ed9568f55aaeab186b7</guid>
				<title>Lukas replied to the discussion CONTROLLINO MEGA in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/controllino-mega/#post-12062</link>
				<pubDate>Tue, 04 Jan 2022 16:17:18 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi Juanfer,</p>
<p>please check the pinout table <a target='_blank' href="https://www.controllino.com/wp-content/uploads/2018/10/CONTROLLINO-MEGA-Pinout.pdf" rel="nofollow">here</a>. </p>
<p>Arduino pin numbers (blue) are not the same as the CONTROLLINO digital outputs numbers (green). </p>
<p>Better to use our own pin aliases as we do in our <a target='_blank' href="https://github.com/CONTROLLINO-PLC/CONTROLLINO_Library/blob/master/Common/Blinking_LEDs/Blinking_LEDs.ino" rel="nofollow">examples</a>.</p>
<p>Thanks,</p>
<p>Lukas</p>
</p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">1601bc0c9cae619b159d13e47b883ba2</guid>
				<title>Lukas replied to the discussion AnalogWrite causes OVL in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/analogwrite-causes-ovl/#post-12061</link>
				<pubDate>Tue, 04 Jan 2022 16:11:46 +0000</pubDate>

									<content:encoded><![CDATA[<p>Dear Alex,</p>
<p>thanks for letting us know.</p>
<p>Best regards,</p>
<p>Lukas</p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">d7b51223e21bff1cf4d49d2896008a7e</guid>
				<title>Lukas replied to the discussion stepper circuit in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/stepper-circuit/#post-12060</link>
				<pubDate>Tue, 04 Jan 2022 16:08:57 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hello Kwaaigone,</p>
<p>the person in the video is the father of CONTROLLINO! 🙂</p>
<p>I will ask him for the sources.</p>
<p>Best,</p>
<p>Lukas</p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">747152b7e1027e767d433101b721e5d2</guid>
				<title>Lukas replied to the discussion DHCP connection failed in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/dhcp-connection-failed/#post-12059</link>
				<pubDate>Tue, 04 Jan 2022 15:18:47 +0000</pubDate>

									<content:encoded><![CDATA[<p>Great, thanks for the feedback!</p>
<p></p>
<p>Oltimer says: <span>Hello, I had the same problem today but thanks to your contribution I was able to fix it immediately!</span></p>
<p><span><br /></span></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">971b026fb2ba49ecfd1c492ff9ca6a23</guid>
				<title>Lukas replied to the discussion Controllino MAXI RS485 Modbus in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/controllino-maxi-rs485-modbus/#post-12058</link>
				<pubDate>Tue, 04 Jan 2022 15:09:49 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi Kwaaigone,</p>
<p>I think that your sketch may stuck when the reply from the Modbus slave is shorter than 7 bytes. It will stay in the blocking function Serial3.read. </p>
<p>And what can be the reason? Maybe you switch the RS485 direction too fast. The flush function may end when the last byte is loaded into the trasmit buffer, but not transmitted yet. As&hellip;</p>
<p><span class="activity-read-more" id="activity-read-more-1941"><a href="https://community.controllino.com/forums/discussion/controllino-maxi-rs485-modbus/#post-12058" rel="nofollow"> Read more</a></span></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">7f7a4a0a73ec810da0c0da07af4c65dc</guid>
				<title>Lukas replied to the discussion Modbus with temperature/humidity/gas sensor . in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/modbus-with-temperature-humidity-gas-sensor/#post-12057</link>
				<pubDate>Tue, 04 Jan 2022 14:44:01 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi,</p>
<p>thanks for sharing! Have you also resolved the issue with the wrong temperature?</p>
<p>Lukas</p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">0b535b541ac2de76d6d78bfe5c368c5a</guid>
				<title>Lukas replied to the discussion DS18S20 One Wire Tutorial in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/ds18s20-one-wire-tutorial/#post-12056</link>
				<pubDate>Tue, 04 Jan 2022 14:41:58 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hello Andreas,</p>
<p>do you have any progress so far?</p>
<p>Have you properly changed the pin number also in the sketch?</p>
<pre>OneWire ds(20); // on pin 20 (a 4.7K resistor is necessary)</pre>
<p>Thanks,</p>
<p>Lukas</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">8ca12c96b362057c5422320ff6afbc3d</guid>
				<title>Lukas replied to the discussion Controllino MAXI RS485 Modbus in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/controllino-maxi-rs485-modbus/#post-11852</link>
				<pubDate>Fri, 05 Nov 2021 16:32:19 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi,</p>
<p>the code seems to be correct and it should work.</p>
<p>Please, share the part of the sketch where you set the ModbusSlaveRegisters value.</p>
<p>Thanks,</p>
<p>Lukas</p>
<p></p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">f7895c3b3db00f2f231cdc033c230346</guid>
				<title>Lukas replied to the discussion DHCP connection failed in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/dhcp-connection-failed/#post-11850</link>
				<pubDate>Fri, 05 Nov 2021 14:43:42 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi,</p>
<p>comment out the line </p>
<pre>Ethernet.init(10); // Most Arduino shields</pre>
<p>The chipselect is defined in the board definition, so it will be defined properly when you select the Board &#8211; CONTROLLINO.</p>
<p>Please use the latest Ethernet library.</p>
<p>Good luck!</p>
<p>Lukas</p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">7c6aad54bd46ff21d38e225e1ee1c1ec</guid>
				<title>Lukas replied to the discussion RTC Controllino Maxi in the forum General Discussion</title>
				<link>https://community.controllino.com/forums/discussion/rtc-controllino-maxi/#post-11848</link>
				<pubDate>Fri, 05 Nov 2021 14:35:16 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi Ashish,</p>
<p>it seems that your SD card module does not use chip select (CS) signal at all, or you are not handling the SD card CS properly in your sketch.</p>
<p>Good luck!</p>
<p>Lukas </p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">be59dcefb6142e48f158935011d76d84</guid>
				<title>Lukas replied to the discussion Send Digital Signal in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/send-digital-signal/#post-11847</link>
				<pubDate>Fri, 05 Nov 2021 14:32:11 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hello,</p>
<p>the problem is that the CONTROLLINO digital outputs are only high-side switches. So they internally connects 12/24 V (when logical HIGH), but not the ground (when logical LOW). You need to add external pull down resistor between the communication line and the 0V. Recommended value of the resistor is 10 kOhm.</p>
<p>Good luck!</p>
<p>Lukas</p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">0219ea2dedc2c310c641709f9c3e8a18</guid>
				<title>Lukas replied to the discussion Plans for More Powerful Microcontroller in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/plans-for-more-powerful-microcontroller/#post-11846</link>
				<pubDate>Fri, 05 Nov 2021 14:22:14 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi,</p>
<p>thank you for your feedback!</p>
<p>Sure there are some plans to improve the product 🙂</p>
<p>Simple text based webpage should work fine even with the Atmega2560. And what about some cloud solution if you want to have glossy graphs and sliders?</p>
<p>Best regards,</p>
<p>Lukas</p>
<p></p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">b376ddf243aa59c5c2ccb0865a23f376</guid>
				<title>Lukas replied to the discussion Ethernet hangs after hours in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/ethernet-hangs-after-hours/#post-11845</link>
				<pubDate>Fri, 05 Nov 2021 14:12:35 +0000</pubDate>

									<content:encoded><![CDATA[<p>Please check <a target='_blank' href="https://github.com/arduino-libraries/Ethernet/issues/166" rel="nofollow">this issue</a> of the Arduino Ethernet library. Is this also your case? Asynchronous bi-directional communication?</p>
<p>Thanks,</p>
<p>Lukas</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">42842662c9ebe6889bc5f99f4054b273</guid>
				<title>Lukas replied to the discussion Problems with UART and Transceiver in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/problems-with-uart-and-transceiver/#post-11772</link>
				<pubDate>Fri, 22 Oct 2021 07:49:41 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi, Serial, Serial1 and Serial2 are accessible at the CONTROLLINO pin headers. At the KYL-210 you should use TTL levels. Do not forget to interconnect GND. </p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">ab34f43db6c6a1b0c54fed96087f9193</guid>
				<title>Lukas replied to the discussion Controllino heating requirements in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/controllino-heating-requirements/#post-11771</link>
				<pubDate>Fri, 22 Oct 2021 07:40:56 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi,</p>
<p>the CONTROLLINO is designed and tested for temperatures above 0 degrees C.</p>
<p>It shoud work, but you can try it at your own risk 🙂</p>
<p>Thanks,</p>
<p>Lukas</p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">81bf10695e451765955ab4a6a6ab55dd</guid>
				<title>Lukas replied to the discussion RTC Controllino Maxi in the forum General Discussion</title>
				<link>https://community.controllino.com/forums/discussion/rtc-controllino-maxi/#post-11770</link>
				<pubDate>Fri, 22 Oct 2021 07:36:23 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi Ashish,</p>
<p>you should comment out or delete this line of code in our example sketch </p>
<pre>Controllino_SetTimeDateStrings(__DATE__, __TIME__); /* set compilation time to the RTC chip */<br /></pre>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">6a25bdbac0a144b7080cfd60d806a68a</guid>
				<title>Lukas replied to the discussion Retrieve device's Serial Number, VID, PID and board type in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/retrieve-devices-serial-number-vid-pid-and-board-type/#post-11769</link>
				<pubDate>Fri, 22 Oct 2021 07:26:27 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi Jan, I am afraid that Atmega MCUs do not have an unique ID. But you can store some hidden magic number into EEPROM (by another sketch) and then check it from your sketch. <a target='_blank' href="https://forum.arduino.cc/t/retain-eeprom-on-sketch-upload/104420" rel="nofollow">This thread</a> may help you.</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">089d768d7675dadaa05540b71c4d70ff</guid>
				<title>Lukas replied to the discussion Retrieve device's Serial Number, VID, PID and board type in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/retrieve-devices-serial-number-vid-pid-and-board-type/#post-11730</link>
				<pubDate>Thu, 30 Sep 2021 09:44:33 +0000</pubDate>

									<content:encoded><![CDATA[<p>Not possible in CONTROLLINO because the USB is handled by another microcontroller Atmega16U2 (like on Arduino MEGA or UNO). As far as I know the sketch is not able to directly  communicate with this chip.</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">411e0f5506a21a41afacfa1023f02394</guid>
				<title>Lukas replied to the discussion RTC Controllino Maxi in the forum General Discussion</title>
				<link>https://community.controllino.com/forums/discussion/rtc-controllino-maxi/#post-11729</link>
				<pubDate>Thu, 30 Sep 2021 09:42:10 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hello Ashish,</p>
<p>and is the problem in RTC itself or the interaction with the Keypad Shield?</p>
<p>Is the RTC OK when you use CONTROLLINO example sketch?</p>
<p>Maybe you can share more details &#8230; how it is connected, your test sketch etc.</p>
<p>Thanks,</p>
<p>Lukas</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">5384611930e799517347fc17d747ec9e</guid>
				<title>Lukas replied to the discussion Jitter period at digital output in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/jitter-period-at-digital-output/#post-11728</link>
				<pubDate>Thu, 30 Sep 2021 09:37:14 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi,</p>
<p>please note that the screw terminal digital outputs of CONTROLLINO MAXI are High Side switches. They are only connecting/disconnecting the terminal to/from supply voltage. Not ground. I think that this is the reason for your troubles.</p>
<p>Best regards,</p>
</p>
<p>Lukas</p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">81653bfbb1552eee324493986f5df37c</guid>
				<title>Lukas replied to the discussion How to be a contributor of Controllino? in the forum General Discussion</title>
				<link>https://community.controllino.com/forums/discussion/how-to-be-a-contributor-of-controllino/#post-11727</link>
				<pubDate>Thu, 30 Sep 2021 09:25:44 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi,</p>
<p>in which way? Create some tutorial? Write some library?</p>
<p>Thanks,</p>
<p>Lukas</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">a41f1373ca4b490c5151fbb63399832f</guid>
				<title>Lukas replied to the discussion Upload Error in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/upload-error/#post-11726</link>
				<pubDate>Thu, 30 Sep 2021 09:22:18 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi, then I am afraid that the bootloader is erased or corrupted. Are you able to program the bootloader by some AVR programmer – e.g. Atmel ICE?</p>
<p>Thanks,</p>
<p>Lukas</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">862b88365905fc50de9674d990f9bdec</guid>
				<title>Lukas replied to the discussion OneButton.h library in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/onebutton-h-library/#post-11725</link>
				<pubDate>Thu, 30 Sep 2021 09:15:35 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi,</p>
<p>please note that the voltage divisor at screw terminals works as an internal pull-down resistor. So you should connect the button between the terminal and the supply voltage. Then it should work, but – you should not activate internal pull-ups in the microcontroller, and it will be inverted (HIGH when pushed, LOW when pulled). </p>
<p>You need to i&hellip;</p>
<p><span class="activity-read-more" id="activity-read-more-1478"><a href="https://community.controllino.com/forums/discussion/onebutton-h-library/#post-11725" rel="nofollow"> Read more</a></span></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">25a37577eda641ec840f0ac732acc0f5</guid>
				<title>Lukas replied to the discussion Problem Maxi Automatin between Controllino_AI9 and Controllino_AI10 in the forum Software &#038; Firmware</title>
				<link>https://community.controllino.com/forums/discussion/problem-maxi-automatin-between-controllino_ai9-and-controllino_ai10/#post-11722</link>
				<pubDate>Thu, 30 Sep 2021 09:09:18 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi Michael,</p>
<p>please note that voltage divisor at screw terminals works as an internal pull-down resistor. So you shoud connect the button between the terminal and the supply voltage. Then it should work, but &#8211; you should not activate internal pull-ups in the microcontroller, and it will be invert<span>ed (HIGH when pushed, LOW when pulled).</span></p>
<p>Best regards,</p>
<p>Lukas</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">de24e6697d70c5c65ef18c51d0dd7c26</guid>
				<title>Lukas replied to the discussion MAC Address of Controllino in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/mac-address-of-controllino/#post-11721</link>
				<pubDate>Thu, 30 Sep 2021 08:59:28 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi Tomas,</p>
<p>WIZnet chipset W5100 has no fixed, or assigned MAC address, so the CONTROLLINO is sold without a MAC address.</p>
<p>Until the CONTROLLINO is not online and operated just in the LAN, it is not necessary to have a unique MAC address.</p>
<p>If you really need a unique MAC address for your CONTROLLINO, please contact us at <a href="mailto:info@controllino.com" rel="nofollow">info@controllino.com</a>.</p>
<p>Thanks,</p>
<p>&hellip;</p>
<p><span class="activity-read-more" id="activity-read-more-1474"><a href="https://community.controllino.com/forums/discussion/mac-address-of-controllino/#post-11721" rel="nofollow"> Read more</a></span></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">37535b99e7829b2e22f74554297a44b5</guid>
				<title>Lukas replied to the discussion Controllino Power Automation pinout... in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/controllino-power-automation-pinout/#post-11718</link>
				<pubDate>Thu, 30 Sep 2021 07:56:58 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi,</p>
<p>yes, it should be the same as Maxi Automation. There are just 5 relays instead of 10.</p>
<p>Best regards,</p>
</p>
<p>Lukas</p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">982524a799be330dca0b32a79f4122a8</guid>
				<title>Lukas replied to the discussion Controllino with Analog Output and RS485 in the forum Hardware</title>
				<link>https://community.controllino.com/forums/discussion/controllino-with-analog-output-and-rs485/#post-11717</link>
				<pubDate>Thu, 30 Sep 2021 07:50:14 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hello Calvin,</p>
<p>I have sent a reminder to Marco.</p>
<p>Lukas</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">12064598a7e955f3dff974d611ef94cc</guid>
				<title>Lukas replied to the discussion ModBus with RS-485 in the forum Projects</title>
				<link>https://community.controllino.com/forums/discussion/modbus-with-rs-485/#post-11716</link>
				<pubDate>Thu, 30 Sep 2021 07:49:01 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hello Ashish,</p>
<p>there are already some threads about Modbus here in the forum. Check them, maybe it will help you to let it run. </p>
<p>I always recommend buying a USB-RS485 converter and at first try to set up a PC as a Modbus Master and communicate with the sensor.</p>
<p>Good luck!</p>
</p>
<p>Lukas </p>
<p></p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">1b3b9f2c648418715d1460879807b4ba</guid>
				<title>Lukas replied to the discussion Retrieve device's Serial Number, VID, PID and board type in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/retrieve-devices-serial-number-vid-pid-and-board-type/#post-11715</link>
				<pubDate>Thu, 30 Sep 2021 07:44:08 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hello,</p>
<p>which &#8220;code&#8221; do you mean? The sketch for CONTROLLINO, or some custom build app for PC?</p>
<p>Thanks,</p>
<p>Lukas</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">76a070015a327ceab1fc4bd3b72f4d61</guid>
				<title>Lukas replied to the discussion EL-USB-5 in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/el-usb-5/#post-11714</link>
				<pubDate>Thu, 30 Sep 2021 07:42:22 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hello Ashish,</p>
<p>data logger specification says </p>
<p>Input Voltage Range &#8211; <span>3 to 28V d.c.</span></p>
<p><span>So, yes, it is compatilble with CONTROLLINO.</span></p>
<p><span>Best regards,</span></p>
<p><span>Lukas</span></p>
<p></p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">137defd1644780520862a5eef59f0ea8</guid>
				<title>Lukas replied to the discussion Neopixel and Controllino in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/neopixel-and-controllino/#post-11713</link>
				<pubDate>Thu, 30 Sep 2021 07:39:07 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi, do you have any progress so far?</p>
<p>Have you connected the stripe to the pin header? And interconnected the GND of CONTROLLINO and external 5V power supply?</p>
<p>Thanks,</p>
</p>
<p>Lukas</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">84fb9680f347f167a8b31ad0bd49111d</guid>
				<title>Lukas replied to the discussion GND Port of Controllino Maxi in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/gnd-port-of-controllino-maxi/#post-11712</link>
				<pubDate>Thu, 30 Sep 2021 07:24:17 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi Calvin, I will try to push CTO to reply 🙂</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">c85fe494dccf33da9ecd72e884c62e8b</guid>
				<title>Lukas replied to the discussion example circuits in controllino in the forum Tutorials</title>
				<link>https://community.controllino.com/forums/discussion/example-circuits-in-controllino/#post-11671</link>
				<pubDate>Tue, 17 Aug 2021 09:15:39 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hi Johi,</p>
<p>I have forwarded you request to admin of the Forum.</p>
<p>Best regards,</p>
<p>Lukas</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">43ce9ce8552c0e0eb4f123c7a56705cc</guid>
				<title>Lukas replied to the discussion Modbus communication via Controllino in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/modbus-communication-via-controllino/#post-11670</link>
				<pubDate>Tue, 17 Aug 2021 09:11:51 +0000</pubDate>

									<content:encoded><![CDATA[<p>Great! Good job!</p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">2a6b4869db33da4a13e2385aaf1c16b8</guid>
				<title>Lukas replied to the discussion stepper circuit in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/stepper-circuit/#post-11668</link>
				<pubDate>Tue, 17 Aug 2021 09:00:51 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hello, which type of stepper motor you want to use? Which type of CONTROLLINO you have?Please go through <a target='_blank' href="https://www.arduino.cc/en/Tutorial/LibraryExamples/StepperSpeedControl" rel="nofollow">this article </a>and let us know if you need more help. </p>
]]></content:encoded>
				
				
							</item>
					<item>
				<guid isPermaLink="false">b4ec1d7218fc590f0c87e059d145f971</guid>
				<title>Lukas replied to the discussion Communication with Ethernet in the forum Questions &#038; Troubleshooting</title>
				<link>https://community.controllino.com/forums/discussion/communication-with-ethernet/#post-11666</link>
				<pubDate>Tue, 17 Aug 2021 08:56:52 +0000</pubDate>

									<content:encoded><![CDATA[<p>Hello, yes it should be possible, but I am afraid that you have to be experienced programmer to integrate the SICK library into Arduino IDE. Best regards,</p>
<p>Lukas</p>
]]></content:encoded>
				
				
							</item>
		
	</channel>
</rss>
		