Forum Replies Created

Viewing 1 - 6 of 6 posts

  • enfo

    Member
    August 24, 2020 at 9:11 am

    Hi Lukas,

    unfortunately during the flashing operation, occurred that i show you and i can’t proceed with the bootloader change.

  • enfo

    Member
    August 11, 2020 at 3:13 pm

    I uploaded the video on Google Drive, i hope that you can watch it.https://drive.google.com/file/d/1i6aHIC5lWSq05N-hR0BELeRP6CLtAr0h/view?usp=sharing” class=”bbcode_url”>https://drive.google.com/file/d/1i6aHIC5lWSq05N-hR0BELeRP6CLtAr0h/view?usp=sharing

    The current state of Controllino is this, i can’t upload any new sketch and the led of 12V and 24V are red.

  • enfo

    Member
    August 11, 2020 at 2:51 pm

    Thank you Lukas, i solved this problem including the library in the sketch folder and connecting the GND.

  • enfo

    Member
    August 10, 2020 at 9:15 am

    Hi, i tried the guide that you posted, but unfortunally Controllino stopped working.

    Can i post the video with its behaviour?

  • enfo

    Member
    April 4, 2020 at 2:57 pm

    Hi, you can try to send an email to the support.

  • enfo

    Member
    December 19, 2019 at 3:19 pm

    Hi, thanks for your answer, how can i use Modbus on this model of Controllino?

Viewing 1 - 6 of 6 posts

Report Content

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.