Activity › Forums › Questions & Troubleshooting › Controllino Mega RS485 ModbusRTU with DBLS-01S brushless dc motor driver › Reply To: Controllino Mega RS485 ModbusRTU with DBLS-01S brushless dc motor driver

  • Lukas

    Member
    March 15, 2023 at 4:03 pm

    Hi nbcdntr,

    Modbus is tricky. It is hard to let it running when you do not have experience with the master side (CONTROLLINO) and the slave (sensor or motor controller). I always recommend to start with simplier setup – use PC with USB-RS485 converter and some Modbus Master application and try to control the motor. Then, when you are sure you know the baudrate, address, registers and their meaning, switch to CONTROLLINO.

    Good luck!

    Lukas

Report Content

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.