Activity › Forums › Questions & Troubleshooting › Hardware › [MAXI Automation] OVL LED green with USB, orange/red with 24V supply › Reply To: [MAXI Automation] OVL LED green with USB, orange/red with 24V supply

  • Friedl_AP

    Member
    February 24, 2021 at 10:52 am

    For what it’s worth, as software the Blinking_LEDs was loaded during the tests.

    When only the USB cable is connected, the +5V (X1) vs. GND (X1) measures about 4.17V.

    When I switch on the 24V Supply, the +5V (X1) vs. GND (X1) measures about 4.86V.

    Multimeter used: Keysight 34461A (calibration date: 23.03.2020)

Report Content

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.