Activity › Forums › Questions & Troubleshooting › Hardware › RTC not responding

  • RTC not responding

     Jarda updated 4 years, 1 month ago 2 Members · 2 Posts
    Hardware

  • mburm

    Member
    January 24, 2020 at 5:49 pm

    Hi all,

    I have a controllino mini and try to use the RTC. I put the switch in the on position and i uploaded the DemoRTC code from the provided examples. However, in the serial print, all time values are reported as zero, instead of increasing as expected. Any thoughts?

  • Jarda

    Member
    March 9, 2020 at 12:08 pm

    Hello,

    normally zeros are reported in case of RTC switch in possition “0”. Are you sure that you have switch in possition “1”?

    Do you have something else connected to the CONTROLLINO please?

    Regards

    Jarda

Viewing 1 - 2 of 2 replies

Log in to reply.

Original Post
0 of 0 posts June 2018
Now

Report Content

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.