Activity Forums Questions & Troubleshooting Hardware Pzem 004t energy module

  • Pzem 004t energy module

     Jarda updated 4 years, 2 months ago 2 Members · 2 Posts
  • giovamec

    Member
    July 3, 2019 at 1:05 pm

    Dear Team

    I’m your customer

    and I’m trying to use “Pzem 004t energy module” with MAXI. this works only on the pin headers of serial 2 (RX2;TX2 pin 17 and 16).

    I tried on serial 1 or with a soft serial on the other pins but with a negative result.

    could you tell me which pins to try? ie on which pins there are lower protection resistances to be able to read the signal?

    Giovanni

  • Jarda

    Member
    January 20, 2020 at 12:39 pm

    Dear Giovanni,

    Serial 1 has higher protection resistances. When you use Serial 2 and it is working, we propose to use Serial 2. The other I/Os with lower impedances are SPI lines (be careful here because the SPI is shared), or you can use pins common with Outputs where is also protection impedance lower (for example Digital 1-5), but this can have influence to outputs. In general – serial 2 is the solution ;-).

    Jarda

Viewing 1 - 2 of 2 replies

Log in to reply.

Original Post
0 of 0 posts June 2018
Now