MQTT Library

[mfathany-psi]

Can I request the Full Example Code MQTT ?

[ifi_raj]

Hello,

I think the “MQTT” Lib from Joel Gaehwiler is used here. On the Github Site you can see some examples and information to the lib: https://github.com/256dpi/arduino-mqtt

[jasin]

Hello

Here it is.

It was tested as PlatformIO project with this config (.ini)

; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

[env:controllino_maxi]
platform = atmelavr
board = controllino_maxi
framework = arduino
lib_deps = controllino, ethernet, SPI, MQTT

Code:

#include <SPI.h>
#include <Controllino.h> /* Usage of CONTROLLINO library allows you to use CONTROLLINO_xx aliases in your sketch. */
#include <Ethernet.h>	 
#include <MQTT.h> ​/* by Joël Gähwiler. Have to be installed via Library Manager. See https://github.com/256dpi/arduino-mqtt */
/*
 ​CONTROLLINO - Demonstration of MQTT protocol usage, Version 01
 ​Based on example code by Joël Gähwiler. See https://github.com/256dpi/arduino-mqtt .
​You can check on your device after a successful
​connection here: https://shiftr.io/try .
 ​
 ​Compatible with CONTROLLINO MAXI, MAXI Automation and MEGA.
 ​IMPORTANT INFORMATION!
 ​Please, select proper target board in Tools-&gt;Board-&gt;Controllino MAXI/MEGA before Upload to your CONTROLLINO.
 ​
 ​(Refer to https://github.com/CONTROLLINO-PLC/CONTROLLINO_Library if you do not see the CONTROLLINOs in the Arduino IDE menu Tools-&gt;Board.)
 ​
 ​Created 29 Jan 2019
 ​by Jasin
 ​https://controllino.biz/
 ​
 ​Check https://github.com/CONTROLLINO-PLC/CONTROLLINO_Library for the latest CONTROLLINO related software stuff.
 ​Visit our forum here: https://forum.controllino.biz/ 
*/
byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
byte ip[] = {192, 168, 16, 177};  // &lt;- change to match your network
EthernetClient net;
MQTTClient client;
unsigned long lastMillis = 0;
void connect() {
 ​Serial.print("connecting...");
 ​while (!client.connect("Controllino", "try", "try")) {
   ​Serial.print(".");
   ​delay(1000);
 ​}
 ​Serial.println("nconnected!");
 ​client.subscribe("/controllino.biz");
 ​// client.unsubscribe("/hello");
}
void messageReceived(String &amp;topic, String &amp;payload) {
 ​Serial.println("incoming: " + topic + " - " + payload);
}
void setup() {
 ​Serial.begin(9600);
 ​Ethernet.begin(mac, ip);
 ​// Note: Local domain names (e.g. "Computer.local" on OSX) are not supported by Arduino.
 ​// You need to set the IP address directly.
 ​client.begin("broker.shiftr.io", net);
 ​client.onMessage(messageReceived);
 ​connect();
}
void loop() {
 ​client.loop();
 ​if (!client.connected()) {
   ​connect();
 ​}
 ​// publish a message roughly every second.
 ​if (millis() - lastMillis &gt; 1000) {
   ​lastMillis = millis();
   ​client.publish("/controllino.biz", "Hello Controllino");
 ​}
}
/* 2019-01-29: The sketch was successfully tested with Arduino 1.8.5, Controllino Library 3.0.4 and CONTROLLINO MAXI. */

• This reply was modified 4 years, 6 months ago by  ivan-controllino.
• This reply was modified 4 years ago by  ivan-controllino.
• This reply was modified 4 years ago by  ivan-controllino.
• This reply was modified 4 years ago by  ivan-controllino.