• Internet

  • l-fakkert

    January 5, 2019 at 10:00 am

    I am a Dutch user of Controllino and have been using the maxi and the mega for several years now. I really like the PLCs. At a site running a Mega and is connected via a router to the Internet. With the inputs A0: A … I can manually intervene on location or give commands. I also want the same on my PC at 80 Km distance from the location. Which software can I best use for that?

  • tom

    January 24, 2019 at 5:10 pm

    The simplest solution would be Blynk:


  • sidneychu

    November 23, 2020 at 10:18 am

    In the Blynk app, there is no “Controllino” device in the selection lists, any suggestions? Thank you so much.

  • Lukas

    January 11, 2021 at 10:01 am

    The CONTROLLINO is compatible with Arduino Mega + Ethernet shield. So it should work when you use the library herehttps://github.com/blynkkk/blynk-library#quickstart-arduino–ethernet-shield

  • ivan-controllino

    January 11, 2021 at 12:16 pm

    Hi @sidneychu and @l-fakkert – I’d like to add that we are currently developing our very own IoT Cloud. You can find more information on our website http://www.controllino.cloud. We are currently working extremely hard to finish final tasks before launch and we expect to be done within the next couple of weeks.

    On the website, you will also find tutorials and sample code about how to connect your Controllino to the cloud over the Ethernet port.

Viewing 1 - 5 of 5 replies

Log in to reply.

Original Post
0 of 0 posts June 2018