Because I have an H-Bridge and connected it with the Controllino, but the DO of the Controllino only gives out 12 or 24V and the Bridge works with 5V. So is there a way to get an 5V Output from the Controllino or control the Motor directly? I’ve read the Menu but I couldn’t find the answer. Does anyone know the answer?
No there is not. But there is a very simple way to make 5V out of 12V : use a voltage divider, that is 2 resistors in series. The output voltage = the input voltage * R1 / (R1+R2) so if you take 24V – 2K + 1K – GND you will get 4V over the 1 k resistor to GND.