Activity Forums Questions & Troubleshooting Controllino MAXI, bricked?

  • Controllino MAXI, bricked?

  • magloman

    Member
    January 16, 2022 at 7:06 pm

    Hi everyone,

    I am quit new to this arduino world. I have started maybe a year ago. I have several different unos and some ESPs.

    Now I have a Controllino MAXI that have worked. But I have fooled around with it so now it wont upload sketches anymore.

    Anyone that can help me in right direction?

    Arduino IDE 1.8.19 and Controllino 3.1.0 (have also tested older IDE and older boards)

    Arduino: 1.8.19 (Windows 10), Board: "CONTROLLINO MAXI"

    ....

    Using board 'controllino_maxi' from platform in folder: C:\Users\Magnus\AppData\Local\Arduino15\packages\CONTROLLINO_Boards\hardware\avr\3.1.0

    Using core 'arduino' from platform in folder: C:\Users\Magnus\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.4

    ....

    Sketch uses 662 bytes (0%) of program storage space. Maximum is 253952 bytes.

    Global variables use 9 bytes (0%) of dynamic memory, leaving 8183 bytes for local variables. Maximum is 8192 bytes.

    C:\Users\Magnus\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17/bin/avrdude -CC:\Users\Magnus\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17/etc/avrdude.conf -v -patmega2560 -cwiring -PCOM12 -b115200 -D -Uflash:w:C:\Users\Magnus\AppData\Local\Temp\arduino_build_871050/sketch_jan16a.ino.hex:i

    avrdude: Version 6.3-20190619

    Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

    Copyright (c) 2007-2014 Joerg Wunsch

    System wide configuration file is "C:\Users\Magnus\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17/etc/avrdude.conf"

    Using Port : COM12

    Using Programmer : wiring

    Overriding Baud Rate : 115200

    AVR Part : ATmega2560

    Chip Erase delay : 9000 us

    PAGEL : PD7

    BS2 : PA0

    RESET disposition : dedicated

    RETRY pulse : SCK

    serial program mode : yes

    parallel program mode : yes

    Timeout : 200

    StabDelay : 100

    CmdexeDelay : 25

    SyncLoops : 32

    ByteDelay : 0

    PollIndex : 3

    PollValue : 0x53

    Memory Detail :

    Block Poll Page Polled

    Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack

    ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------

    eeprom 65 10 8 0 no 4096 8 0 9000 9000 0x00 0x00

    flash 65 10 256 0 yes 262144 256 1024 4500 4500 0x00 0x00

    lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00

    hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00

    efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00

    lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00

    calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00

    signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00

    Programmer Type : Wiring

    Description : Wiring

    Programmer Model: AVRISP

    Hardware Version: 15

    Firmware Version Master : 2.10

    Vtarget : 0.0 V

    SCK period : 0.1 us

    avrdude: AVR device initialized and ready to accept instructions

    Reading | ################################################## | 100% 0.01s

    avrdude: Device signature = 0x1e9801 (probably m2560)

    avrdude: reading input file "C:\Users\Magnus\AppData\Local\Temp\arduino_build_871050/sketch_jan16a.ino.hex"

    avrdude: writing flash (662 bytes):

    Writing | ################################################## | 100% 0.12s

    avrdude: 662 bytes of flash written

    avrdude: verifying flash memory against C:\Users\Magnus\AppData\Local\Temp\arduino_build_871050/sketch_jan16a.ino.hex:

    avrdude: load data flash data from input file C:\Users\Magnus\AppData\Local\Temp\arduino_build_871050/sketch_jan16a.ino.hex:

    avrdude: input file C:\Users\Magnus\AppData\Local\Temp\arduino_build_871050/sketch_jan16a.ino.hex contains 662 bytes

    avrdude: reading on-chip flash data:

    Reading | ################################################## | 100% 0.09s

    avrdude: verifying ...

    avrdude: verification error, first mismatch at byte 0x0100

    0xff != 0xb2

    avrdude: verification error; content mismatch

    avrdude done. Thank you.

    the selected serial port

    does not exist or your board is not connected

  • Lukas

    Member
    January 19, 2022 at 8:57 am

    Hi magloman,

    this is strange. Is it 100% replicable and always with the same result? (same corrupted address)

    Are you sure that it is not cause by the USB cable? Corrupted or too long, or connected via hub?

    Thanks,

    Lukas

    • magloman

      Member
      January 20, 2022 at 3:39 pm

      Thanks for your reply, I am really exhausted on what to do. Any help is appreciated.

      I just installed IDE on a brand new computer and used another cable. This gives exactly the same error. Same adress as well.

      I can also tell you that the first PC is still working to program Uno and ESP8266s with as is.

Viewing 1 - 2 of 2 replies

Log in to reply.

Original Post
0 of 0 posts June 2018
Now