Activity › Forums › Questions & Troubleshooting › Hardware › Is it possible to reset Controllino when external power source is connected? › Reply To: Is it possible to reset Controllino when external power source is connected?

  • Jarda

    Member
    September 20, 2020 at 6:20 am

    Hi yes,

    solution proposed by Michael seems to be the best. You will monitor this input and when input is low, you will switch OFF the peripherals and correctly switch ON again the the main power is back.

    When you want to really do the hard reset, you can build some simple circuit with RC combination and transistor which will pull down the /RESET on pinheader to low for the “RC” time. But this is more tricky. I would use the solution from Michael.

    BR

    Jarda

Report Content

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.