Reply To: analogWrite on Maxi

[Lukas]

Hello Jan,

Arduino function analogWrite() does not set real analog value to a pin, but runs PWM signal with fixed frequency and variable duty cycle.

So with the standard MAXI you can have only 24 V PWM signal out of the output. (Please note that CONTROLLINO_A1 is analog input pin.).

And if you get 4,8 V, you obviously measure it at the pinheader, which is not correct – please use the screw terminals.

With the MAXI Automation the situation is better – there are two real analog outps there – please see our example.

Thanks,

Lukas