Activity › Forums › Questions & Troubleshooting › Hardware › RST LED › Reply To: RST LED

  • joeg

    Member
    March 1, 2020 at 8:35 am

    Hello,

    I Opened the housing and checked the resistance between the separate terminals of the button.

    The maximal resistance is ~50 ohm. Isn’t this too low?

    I opened the button and removed the cap that connects the terminals when pushed, bit I still read a very low resistance across terminals.

    The even lower resistance for the open channel is ~0.5 ohm, which makes sense.

Report Content

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.