Activity › Forums › Questions & Troubleshooting › Hardware › Controllino and DELTA 103WQ › Reply To: Controllino and DELTA 103WQ

  • Lukas

    Member
    June 13, 2019 at 2:27 pm

    Hi,

    in general, we strongly recommend following procedure to bring your Modbus setup into live:

  • Try to run the setup with a PC as the Modbus Master.

  • There exists some free to use Modbus Master applications for PC.

  • In this way you can be really sure that you have correct cabling, you have correctly setup addresses of the slave devices and you are using correct Register numbers.

  • Once it is working, then you can start the integration with CONTROLLINO.

    • Good luck!

    Lukas

Report Content

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.