Activity › Forums › Questions & Troubleshooting › Setup & Installation › Controllino MINI documentation › Reply To: Controllino MINI documentation

  • Jarda

    Member
    March 25, 2019 at 2:58 pm

    Hello Puggy,

    the HW of the CONTROLLINO is not open source, you can find all needed information at https://www.controllino.biz/downloads/#manuals” class=”bbcode_url”>https://www.controllino.biz/downloads/#manuals including description which peripheral is connected to which port.

    About using of the PWM, you can use standard PWM sketch from Aurduino, it shall work. Also you can find a lot of example sketches if you install the CONTROLLINO plugin into your IDE.

    Yes, mini has outputs connected in parallel with relays, if you use the PWM, then depends on dutty cycle if the relay will be switched ON or OFF. Of course you cannot use relay with higher frequency PWM function ;).

    Regards

    Jarda

Report Content

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.