Activity › Forums › Questions & Troubleshooting › Hardware › CONTROLLINO for real projects › Reply To: CONTROLLINO for real projects

  • paulsm

    Member
    June 10, 2020 at 8:07 pm

    Hello. I am looking to build a cnc machine. Is a controllino a good choice (for cnc)? I see that outputs can be loaded max 2A and if more outputs used at one time – 0.5A max and relay outputs are not the choice. I see that even small stepper, like nema 17 need 1.7 amps or even 3.5 amps when both coils loaded. Correct me if I am wrong, thank you.

Report Content

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.