Activity › Forums › Questions & Troubleshooting › Hardware › SPI SD Card shield together with RTC › Reply To: SPI SD Card shield together with RTC

  • maggo

    Member
    January 10, 2019 at 8:00 pm

    Thanks Lukas,

    as I have to switch between the SPI Clients (RTC,SD,Ethernet) in the software I would need the PIN’s for chipSelect. I think the PIN for SD shall be 53. But in the PIN description there is no PIN Number for RTC/SS and ETH/SS??. Please help.

    regards

    Maggo

    P.S. To run only the RTC+Ethernet togehter is not a problem it works fine, without switching the SPI Clients

Report Content

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.