Activity › Forums › Questions & Troubleshooting › Computer don’t recognize the controllino › Reply To: Computer don’t recognize the controllino
-
Hello community,
If the problem is the USB chip in DFU mode please follow this tutorial:
https://support.arduino.cc/hc/en-us/articles/4408887452434-Flash-USB-to-serial-firmware-in-DFU-mode
This is the path to the folder with the .hex files should be:
%USERPROFILE%\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.5\firmwares\atmegaxxu2
for MINI use: UNO-dfu_and_usbserial_combined.hex
for MAXI or MEGA use: MEGA-dfu_and_usbserial_combined.hex
Hope this fix the issue you have with your boards,
Best Regards,
😉👍
-
This reply was modified 2 years, 4 months ago by
pedro-controllino.
-
This reply was modified 2 years, 4 months ago by