Activity Forums Questions & Troubleshooting Software & Firmware AnalogInput Reading Problem with Maxi Power automation Reply To: AnalogInput Reading Problem with Maxi Power automation

  • Lro007

    Member
    January 14, 2021 at 3:28 pm

    Hi Ivan..

    I´m working on a data acquisition application of 0-10 V analog sensors, I was working with the Maxi power automation and with a power supply of 24 V, with no problems..

    In this case, a 12V at an input would produce a Result for analogRead of the input = 402

    But after some data analysis i realized that i needed more resolution, so i decided to switch to a 12V power supply following the provided manual instructions, but as you saw earlier in this post the resolution does not change…

    I need 12V at an input to produce a Result for analogRead of the input = 804 or something like that, in order to better take advantage of the 10 bit conversion of the Analog Input.