Maxi Power pinout

Maxi Power pinout

Jarda updated 4 years, 8 months ago 2 Members · 4 Posts
Hardware
mihhailov

Member
January 13, 2020 at 6:32 pm

Hey,

I have got a Controllino Maxi Power edition. I am bit stuck with controlling Nextion display with it, so I am ćhecking every detail now. One thing I am missing is a pinout table for Power edition (Controllino website says it is “coming soon”).

Just wondering + Is there any way to get it ? I am particularly interested in Serial2 Rx,Tx which should be pins 17(RX), 16(TX). I am using Maxi Automation pinout (X2 physical pins 12 and 13), but as stated above this does not work.
Jarda

Member
January 20, 2020 at 1:14 pm

Hello,

the UART connection shall be the same like on the MAXI Automation.

Serial 2 is the best solution. We are still working on the new version of documentation, but pinheader is compatible with Standard MAXI.

Regards

Jarda
mihhailov

Member
January 22, 2020 at 10:05 am

Thank You for the response.

I managed to get it working – for anyone who might be interested – the solution was to connect GND of Nexus to GND of controller. Logical but not very obvious for the beginner.
Jarda

Member
March 9, 2020 at 12:11 pm

Hello,

Your welcome !

Yes, GND is important .

Regards

Jarda

Viewing 1 - 4 of 4 replies