Can I run a Controllino Maxi Automation on 12V?

[shiftee]

I notice the 12/24V label has been replace by a 12V label.

Is this only a cosmetic change or can it only run on 24V?

Thanks,

Mark

[mr-controllino]

Hello Mark,

The MAXI Automation will work from 10-28V … only the screw terminal inputs are fixed at 24V volts.

But since these inputs are mostly analog inputs … you can easily make a 12V digital input if you use a small IF loop.

You only have to set the level you want to switch to HIGH.

Basically you can make also a digital 5V input with this trick.

regards

Marco

[shiftee]

Thank you. I’m doing more 12V stuff these days