RST LED – Controllino Forums

RST LED

Jarda updated 4 years, 5 months ago 3 Members · 8 Posts
Hardware
joeg

Member
January 29, 2020 at 12:31 pm

Hello,

I’ve been working with a MEGA for a while, but now the RST LED is constantly on and I can’t upload any new sketches to my device.

I would appreciate any assistance you could offer.
Jarda

Member
February 10, 2020 at 11:40 am

Hello,

please try to check the reset button mechanically. If you open the housing, it can be, that the reset button is pressed all the time.

Regards

Jarda
joeg

Member
March 1, 2020 at 8:35 am

Hello,

I Opened the housing and checked the resistance between the separate terminals of the button.

The maximal resistance is ~50 ohm. Isn’t this too low?

I opened the button and removed the cap that connects the terminals when pushed, bit I still read a very low resistance across terminals.

The even lower resistance for the open channel is ~0.5 ohm, which makes sense.
Jarda

Member
March 6, 2020 at 10:31 am

Hello,

so no peripheral is connected to CONTROLLINO?

BR

Jarda
joeg

Member
March 17, 2020 at 9:02 am

No peripherals connected.
Jarda

Member
April 17, 2020 at 12:05 pm

Hello,

so please send it back for reclamation. We will check the problem and let you know.

Regards

Jarda
andrew8020

Member
July 17, 2020 at 2:48 pm

Hi Jarda,

I am having the same problem on a MEGA that was working, the RST light is permanently on, I can’t upload or run existing program, resistance across reset button is 32 ohms when open and MEGA disconnected.

Any assistance would be greatly appreciated.

Thank you
Jarda

Member
July 20, 2020 at 2:22 pm

Dear Andrew,

I’m very sorry that you have similar problem. Please send it also back for reclamation, we will analyse it here.

BR

Jarda

Viewing 1 - 8 of 8 replies