More (digital) input

More (digital) input

Jarda updated 4 years, 10 months ago 2 Members · 2 Posts
Hardware
duccio

Member
January 26, 2020 at 12:16 pm

Hello,

I own a Controllino Mega and I’m actually using as digital input pins from A0 to I18 (19 total inputs).

I know I have available, as output, R0..R15 (16 relay) and D0..D23 (24 digital output).

In my project I really need more input. Is it possibile to use, for example, pins D0..D23 also as “input”?

If yes, how? And if not, how can I add more input to my Controllino Mega?

Thanks!
Jarda

Member
February 10, 2020 at 11:55 am

Hello,

Unfortunately it is not possible to use outputs on screw terminals D0-D23 as inputs.

But you can use corresponding pins on the pinheader with some limitations. First of all voltage level is 5V only, then you have to configure the processor port properly as input and not as output and you have to count with the fact, that logic HIGH will activate also the corresponding output on the screw terminal.

For example: D0 on the screw terminal is corresponding with Arduino pin 2 and this pin is located at pinheader X1.

Best Regards

Jarda

Viewing 1 - 2 of 2 replies