Controllino MINI documentation

[Jarda]

Hello Puggy,

the HW of the CONTROLLINO is not open source, you can find all needed information at https://www.controllino.biz/downloads/#manuals” class=”bbcode_url”>https://www.controllino.biz/downloads/#manuals including description which peripheral is connected to which port.

About using of the PWM, you can use standard PWM sketch from Aurduino, it shall work. Also you can find a lot of example sketches if you install the CONTROLLINO plugin into your IDE.

Yes, mini has outputs connected in parallel with relays, if you use the PWM, then depends on dutty cycle if the relay will be switched ON or OFF. Of course you cannot use relay with higher frequency PWM function .

Regards

Jarda

[mr-controllino]

Hello Puggy,

But you can always disable the Relays … Tutorials … Examples … disconnect Relays

regards

Marco